GATE WARNINGS
The first thing to check is that the gate is in good running order as follows:
A.
(Make sure that) the fixed and moving parts of the gate are strong and non-deformable;
B.
the weight of each gate leaf must not exceed that indicated on technical specifications of the motor type;
C.
the hinges and general structure must be in good condition and the gate must move smoothly throughout
its travel;
D.
the upper hinge alone is sufficient to install the unit; those which are unnecessary can be eliminated (the
lower and that in the middle if exists)
GATE WARNINGS AND PRECAUTIONS
Not for pedestrian opening
Fig. 1
Fig. 2
Fig. 3
PRECAUTIONS
This automation has been created for the automation of gates used by
vehicles only. Be aware to avoid the crossing of the gate path because it
is very dangerous for pedestrians (fig. 4).
Fig. 4
Install the warning signs, on each side of the gate and in avisible
zone
which informs the pedestrians about the danger they run when
passing or resting in the environment of the gate (fig. 5).
Important:
For a higher security, SEA advices to install infrared photocells.
Fig. 5
International registered trademark n. 2.777.971
Содержание COMPACT 120V
Страница 19: ......
