CHAIN INSTALLATION
In the figures 7 and 8 it is possible to see the correct installation with opened and closed gate respectively;
notice the obliged run of the chain inside the pinion group which must not be modified.
For a correct installation follow carefully the indications written below:
1.
Fix the angle irons, with not supplied screws, to the two extremities of the gate and fix the chain with the
provided tie rod (fig. 9).
Opened position
Closed position
Fig. 9
Fig. 7
Fig. 8
Fig. 10
International registered trademark n. 2.777.971
2.
Install the chain making it pass through the pinion group as in fig.11. The chain must be always in line both
vertically and orizontally, if not perfectly aligned (fig. 12 and 13) it may derail from the pinion group or the
motor reducer risks a greater effort not allowing the right operating of the system.
10
