Sea Tel COASTAL 18 Скачать руководство пользователя | Manualshive

Страница: 47 / 78

background image

Coastal 18 Ku-Band TVRO

Maintenance

6-1

6. Maintenance

6.1. Warranty

Information

Sea Tel Inc. supports its Coastal Series systems with a warranty program unsurpassed in the industry.
These systems are backed by a

TWO YEAR

full warranty on parts and a

ONE YEAR

warranty on labor.

What’s Covered by the Limited Warranty?

The Sea Tel Coastal Series Limited Warranty is applicable for parts and labor coverage to the complete
antenna system, including all above-decks equipment (radome, pedestal, antenna, motors, electronics,
wiring, etc.) and the antenna control panel. It does not include television sets, DBS/DTH receivers, multi-
switches or other distribution equipment, whether or not supplied by Sea Tel. Televisions, DBS/DTH
receivers and accessories are covered by the applicable warranties of the respective manufacturers.

Factory refurbished components used to replace systems parts under this warranty are covered by this same
warranty as the original equipment for the balance of the original warranty term, or ninety (90) days from the
date of replacement, whichever occurs last. Original Installation of the Coastal Series system must be
accomplished by or under the supervision of an authorized Sea Tel dealer for the Sea Tel Limited Warranty
to be valid and in force.

Please refer to the complete warranty information included with your system.

6.2. Who to contact for repairs

Should technical assistance be required to repair your system, the first contact should be to the agent/dealer
you purchased the equipment from. Please record their contact information below for future reference.
Repairs to your Coastal Series system must be accomplished by or under the supervision of an authorized
Sea Tel dealer for the Sea Tel Limited Warranty to be valid and in force.

Agent/Dealer: _________________________________________

Address: _________________________________________

_________________________________________

Phone: ______________________ Fax: ____________________

Sea Tel can recommend local dealers that can provide service in your local area that can be contacted for
assistance. You can contact us directly at either of the locations below;

Sea Tel, Inc.

4030 Nelson Avenue

Concord, CA 94520 USA

Tel: 925-798-7979

Fax: 925-798-7986

Toll Free: 1-888-798-7979

Email: [email protected]

http://www.seatel.com

Sea Tel Europe

Unit 1 Orion Industrial Centre

Wide Lane Swaythling

Southampton, UK S018 2HJ

Tel: +44 (0)23 80 671155

Fax: +44 (0)23 80 671166

e-mail: [email protected]

«
...
45
46
47
48
49
...
»

Содержание COASTAL 18















































































Отзывы:

Нет отзывов

Похожие инструкции для COASTAL 18

Бренд: Majestic Страницы: 2

Бренд: Hirschmann Страницы: 2

Бренд: Williams Sound Страницы: 4

Бренд: Signal Kicker Antennas Страницы: 7

Amplified Receive-Only Magnetic Loop Antenna

Бренд: W6LVP Страницы: 2

Бренд: Duratrax Страницы: 2

Бренд: Sanav Страницы: 4

Бренд: One for All Страницы: 2

AntennaMast AM2

Бренд: Will Burt Страницы: 34

Бренд: Audio Technica Страницы: 4

Бренд: 2J Antennas Страницы: 3

Бренд: SteppIR Страницы: 80

Бренд: Mercury Страницы: 4

roadtrip T4 RT2000T

Бренд: Winegard Страницы: 8

BULL Trucker 3000 3/8"

Бренд: Sirio Antenne Страницы: 2

Бренд: IKUSI Страницы: 2

Бренд: Teltonika Страницы: 40

TENNA-ROTOR U-110

Бренд: ALLIANCE Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды