Sea Tel COASTAL 18, Инструкция по установке и эксплуатации

Страница: 35 / 78

Coastal 18 Ku-Band TVRO Setup
5-5
AUTO* Automatically scans through all the available forced * (star’ed)
FEC rates. If the satellite does not generate an NID but does
have a unique combination of FREQ, BAUD and FEC lock,
select the appropriate
FEC* choice from this list. The system will
then generate its own unique forced NID to represent the desired
satellite. You will need to enter this pseudo NID in the
NID
setting below.
1/2*
2/3*
3/4*
5/6*
6/7*
7/8*
NBIF
SCPC mode may be selected for tracking narrow band signals.
This is not normally needed for tracking satellite TV signals.
3
When the desired choice is displayed, press the SAVE key to save the parameters for this
SAT. This saves the FEC rate to use for this SAT.
4
If you want to edit any of the default values that are loaded with preset, press the
▼
arrow
key to go to the next sub-menu parameter.
5
If you do not want to edit any other sub-menu parameters, press SAVE again to exit the sub-
menu and return to the SAT main menu display. From there you can press the
▼ arrow key
to go to next SAT numeric menu choice or to the Factory Settings menu choice.
5.2.3.8. NID
Enter or edit the best Network ID 4 digit HEX value for the receiver to use to Identify & track this
satellite.
1
Press the NEXT key to SELECT this sub-menu parameter for adjustment.
2
A cursor will appear under the rightmost digit. Press ▲ & ▼ arrow keys to
increment/decrement this digit (only valid HEX values 0-F will be displayed).
3
Press the NEXT key to move the cursor to the digit to the left. Press
▲
&
▼
arrow keys to
increment/decrement this digit.
4
Continue editing until all 4 digits have been set to the desired NID for this satellite selection.
Press the SAVE key to save the NID parameter for this SAT.
5
If you want to edit any of the other default values that are loaded with preset, press the
▼
arrow key to go to the next sub-menu parameter.
6
If you do not want to edit any other sub-menu parameters, press SAVE again to exit the sub-
menu and return to the SAT main menu display. From there you can press the
▼
arrow key
to go to next SAT numeric menu choice or to the Factory Settings menu choice.