Sea Tel 6012-12w, Руководство по установке

Страница: 66 / 130

Quick Start Operation
6012-12W Installation Manual
antenna will resume its search pattern.
3. If the system does not acquire the correct
satellite within the prescribed search
pattern, the antenna will retarget and the
cycle will repeat (Search Delay timeout,
conduct search pattern followed by
retarget).
4. Check Latitude, Longitude and Heading.
These should be correct, but may be
updated if necessary.
5. Access the System Status screen.
6. Find the Latitude, Longitude and Heading
displayed values. If they are correct skip to
step 11.
7. If the Latitude & Longitude values are not
correct, access the Communication
Interfaces screen and enter the ships
Latitude & Longitude position in the fields
provided.
8. Click Save.
9. If the Heading value is not correct, enter the
correct value in the lower left field of the
Communication Interfaces screen.
10. Click Save.
11. Check for blockage (this is the MOST
common cause of not being able to acquire
the desired satellite).
12. Verify that the correct satellite is selected.
13. Check for polarization drive failure.
14. Check for improper polarization
alignment/position.
15. Check cable connections to assure that a
cable has not been disconnected.
16. Verify that the modem option file is correct.
17. Check the modem for failure.
11-3
EAR Controlled - ECCN EAR99