Sea Ray 220 Select, Руководство пользователя

Страница: 50 / 94

3.6
S
ECTION
3 • U
SING
Y
OUR
B
OAT
220 Select
(
FIG
. 3.6.4)
(
FIG
. 3.6.3)
Cockpit can fill with water if boat is moving forward,
when it is put into reverse.
Before shifting into reverse, shift to neutral, wait for
the boat to stop moving forward, then shift into
reverse.
! CAUTION
(
FIG
. 3.6.5)
NEUTRAL
8. S
HIFTING
T
O
D
RIVE
T
HE
B
OAT
Bring shift/throttle lever back
to neutral position. The
THROTTLE ONLY button will
pop out.
Then move shift/throttle lever
rapidly, either forward or
reverse, but not very far from
the neutral position. The drive
unit will engage and boat will
start to move slowly in either
forward or reverse. You can
damage the transmission if
you do not shift quickly from
neutral into gear. Once clear of the dock, mooring,
people and/or the no-wake zone and the boat has
been shifted into forward gear, move shift/throttle
lever forward to desired engine speed.
8. TO START ENGINE:
Tur n ignition key
clockwise, as in a car, and
release when engine
star ts. Do not crank
engine for more than a few
seconds if it doesn’t start.
Engine may be very cold
or flooded; see step 7.
9. After engine starts, reduce speed to between
1000 and 1500 RPM and check oil pressure.
10. If oil pressure is correct,
let engine warm up to
normal temperature range
as specified in the engine
manual, before shifting into
forward or reverse gear.
IF OIL PRESSURE
GOES ABOVE OR BELOW OPERATING
RANGE, SHUT ENGINE DOWN
IMMEDIATELY. GET TRAINED HELP TO FIND
AND FIX THE PROBLEM.
11. Check water temperature
to ensure temperature
range remains normal.
IF ENGINE TEMPERATURE GOES ABOVE
NORMAL RANGE. SHUT DOWN THE ENGINE
IMMEDIATELY. GET TRAINED HELP TO FIND
AND FIX THE PROBLEM.
NOTE: REFER TO ENGINE OWNER’S MANUAL
FOR NORMAL GAUGE READINGS.
(
FIG
. 3.6.2)
(
FIG
. 3.6.1)