Page
20
of
38
Fig. 21
1.7.5 AU9 Antenna Lifejacket Clip Fitting
Process
1.
Thread the AU9 antenna through the guide
loops on the jacket. (If you are using a jacket
which does not have pre-made guide loops as
shown in the photos, use instead medium
sized cable ties affixed at two points on the
side of the bladder. You will need to very
carefully make two small holes in the spare
fabric between the two halves of the bladder,
ideally using a fabric hole punch, refer to
Pages 20-23. To fit the clip follow stages 1, 2, 3
& 4 on this and the following page.)
Fig. 22
2.
Bend the antenna near the point where it
connects to the LED Strobe, put the clip
around the antenna as shown.
Fig. 23
3.
Press the clip firmly together so it ‘snaps’ shut
and stays closed on its own.
Содержание AU9
Страница 1: ...Page 1 of 38 ...
Страница 18: ...Page 18 of 38 Fig 18 ...
Страница 37: ...Page 37 of 38 500mw AU9 rECOMMENDED FOR DIVERS long range offshore workers Fig 51 ...
