background image

Page 

16

 of 

38

 

 

1.7.0   WEARING THE AU9 

The  Sea  Marshall®  AU9  unit  can  be  worn  in  a  number  of  different  ways,  some  of  which  will 
increase the tracking range by putting the antenna in a more suitable position for maximum signal 
propagation.  Always  ensure  the  body  of  the  unit  will  be  under  the  waterline  on  immersion  to 
allow the auto-activation function to activate. Also the ground plane provided by the water serves 
to  boost  the  signal  giving  a  greater  tracking  range.  The  AU9  can  be  fitted  to  any  150  and  275N 
lifejacket. MRT offer a range of jackets with a pre-made internal PLB pockets and antenna loops 
ask your re-seller for details or look at our product catalogue for further details. The AU9 can also 
be  fitted  into  an  existing  lifejacket  by  using  a  neoprene  PLB  pouch  (Product  Code  –  07-006-S  ) 
which  is  designed  to  fit  and  hold  the  body  of  the  AU9  onto  the  waistbelt  of  a  lifejacket,  the 
antenna is then fed up into the lifejacket cover and up onto the bladder as shown over the next 
few pages. 
 
1.7.1   Fig. 13 is an overview of how the AU9 PLB can be worn, the larger the tick = greater the 
tracking range/’SOS’ signal transmission 

The manufacturer recomends fitting the AU9 to lifejacket with the antenna clip in 
place for the following reasons:  

1. ENSURES YOUR ALERTING UNIT/PLB IS ALWAYS WITH YOU 
2. PROTECTS YOUR PLB DURING DAY TO DAY USE 
3. INCREASES TRACKING RANGE OF AU9, MAKING YOU MORE ‘VISIBLE’ 

Wearing a lifejacket is a very good thing…but if they can’t quickly locate you …what’s the point?

 

 

 

Fig. 15 

NOTE – the tracking alarm activation range of the sytem is reduced when the transmitter is worn 
around the neck due to absorption of signal by the body and the reduced height of the antenna 
above the water line.

 

NOTE – the tracking ranges listed in this booklet are taken from tests where the receiver antenna has been correctly installed at the 
recommended height with the AU9 correctly installed in either an SMB for divers or lifejacket, with antenna clip for normal use. The 
SMB gave the maximum range listed as achieved during tests, the lifejacket AU9 installation gave the lower end of the ranges listed. 
Wearing the AU9 around the neck will reduce the tracking/alerting ranges to below the ranges listed here in. 

The following pages show how the AU9 can be worn or fitted into a lifejacket.

 

Содержание AU9







































Отзывы: