7
WARNING:
Air compressors that are
designed for other uses
like tire inflation (usually
over 30 psi) can easily
over-inflate and cause
harm to your Sea Eagle
that uses a much lower
pressure. For this reason,
we recommend using only
Sea Eagle electric pumps.
FishSUP |
ASSEMBLY
The motor mount and skegs are easiest to
install before inflating the board.
Insert motor mount board
between the grommets.
Push the aluminum
spacer through the
grommets and board.
Secure with the bolt,
washers and threaded
knob.
WARNING:
Always connect the red
clip to the positive
pole and the black clip
to the negative pole.
Cross connecting wires
could damage both the
pump and the boat.
To connect the pump
to a 12V battery, use
the alligator clips.
Connect the red clip to
the positive pole and
the black clip to the
negative pole.
FishSUP|
SETUP: VALVES & PUMPS
Wrap the carry handle pad
around the carry handle.
The pad can be found in
the orange repair kit
cannister. The carry
handle is a one-time
installation.
Locate an area large
enough to unfold the
FS126 avoiding hazards
that could damage the
board or injure you.
Skegs
Three skegs are included
with the board. Any
combination of skegs can
be inserted into the bases
on the underside of the
board.
