10
FastTrack |
ASSEMBLY
Use the wide, flat
adapter to inflate the
seat.
Insert the wide, flat
adapter into the
valve and inflate the
chambers.
Tall Back Seat
(OPTIONAL)
The Tall Back Seat (TBS)
has four straps to secure
it to the kayak.
Seat shown here is in
rearward position.
Note: Clip to spray skirt
D-rings.
In the middle position,
just forward of the carry
handles, clip the upper
straps to the forward
D-rings. Attach the
rearward lower straps
rearward. Pull the straps
tight.
To attach TBS with motor
mount. First clip seat to
D-rings just forward of
motor mount position.
Follow motormount
attachment instructions
from page 9.
Kayak Paddle
(OPTIONAL)
The asymmetrical spoon
blade design of this kayak
paddle will allow for a
smooth entry and an
even pull, maximizing the
power from each stroke.
They will also require less
gripping force.
Put the shaft together
first. Insert the shaft
piece with the button
into the piece with three
holes. Lock the button in
the middle hole.
All of our kayak paddles assemble in the same manner. Below,
the AB30 7’10” paddle is shown.
Footrest
Run strap through clip
loops. Run strap through
center of buckle and
down through front of
buckle. Drop one clip
though the tube. Clip to
D-rings and adjust strap.
Stuff extra length into
tube.