Sea-doo RXP-X 260 Скачать руководство пользователя страница 67

Страница: 67 / 156

OPERATING INSTRUCTIONS

How to Engage Neutral

WARNING

The drive shaft and impeller are
always turning when the engine is
running, even in neutral position.
Keep away from the propulsion
system of the watercraft.

When the watercraft is first started,
the iBR system automatically sets the
neutral position by default.

To engage neutral from forward posi-
tion, tap the iBR lever.

To engage neutral from reverse posi-
tion, release the iBR lever and throttle
lever.

How to Trim the Neutral Position of
the iBR

When in NEUTRAL, if the watercraft
creeps forward or backward, the iBR
system may be trimmed.

NOTE:

Movement of the watercraft

when operating in neutral may be due
to wind or water current.

If the watercraft is moving forwards,
momentarily press the DOWN button.

If the watercraft is moving backwards,
momentarily press the UP button.

smo2012-003-007_b

TRIMMING THE iBR NEUTRAL POSITION

1. UP button (to stop rearward movement)
2. DOWN button (to stop forward movement)

NOTE:

Press the UP/DOWN button

repeatedly until proper adjustment of
the neutral position is attained and the
watercraft stops moving.

How to Engage Forward

Forward motion can be initiated by sim-
ply depressing the throttle lever.

smo2012-003-005_b

ENGAGING FORWARD

1. Throttle lever

How to Engage and Use
Reverse

Reverse can only be engaged between
idle speed and the threshold forward
speed of 8 km/h (5 MPH).

WARNING

If water current is 8 km/h (5 MPH)
or above, the reverse can not be
engaged as the speed theshold for
the reverse is exceeded.

To engage reverse position, the iBR
lever on the LH handlebar must be
pulled in at least 25% of the lever
travel.

_______________

Содержание RXP-X 260





























































































































































Результаты поиска

Содержание RXP-X 260

Отзывы:

Sea-doo RXP-X 260, Руководство оператора, Страница: 67 / 156

Результаты поиска

Содержание RXP-X 260

Отзывы: