Sea-doo RXP-X 260 Скачать руководство пользователя страница 146 | Manualshive

Страница: 146 / 156

Sea-doo RXP-X 260 Скачать руководство пользователя страница 146

ADDITIONAL TERMS AND CONDITIONS FOR FRANCE ONLY

The following terms and conditions are applicable to products sold in France only:

The seller shall deliver goods that are complying with the contract and shall be re-
sponsible for defects existing upon delivery. The seller shall also be responsible for
defects resulting from packaging, assembling instructions or the installation when
it is its responsibility per the contract or if accomplished under its responsibility. To
be compliant with the contract, the good shall:
1. Be fit for normal use for goods similar thereto and, if applicable:

• Correspond to the description provided by the seller and have the qualities

presented to the buyer though sample or model;

• Have the qualities that a buyer may legitimately expect considering the pub-

lic declarations of the seller, the manufacturer of its representative, including
in advertising or labeling; or

2. Have the characteristics mutually agreed upon as between the parties or be fit

for the specific use intended by the buyer and brought to the attention of the
seller and which accepted.

The action for failure to comply is prescribed after two years after delivery of the
goods. The seller is responsible for the warranty for hidden defects of the good
sold if such hidden defects are rendering the good unfit for the intended use, or
if they diminish its use in such a way that the buyer would not have acquired the
good or would have given a lesser price, had he known. The action for such hidden
defects shall be taken by the buyer within 2 years of the discovery of the defect.

144

______________

«
...
144
145
146
147
148
...
»

Содержание RXP-X 260





























































































































































Отзывы:

Нет отзывов