Sea-doo GTX 4-GTI Скачать руководство пользователя страница 97

Страница: 97 / 138

R1503motr269B

TYPICAL

1. Air intake hose
2. Throttle body

Open the throttle body valve by press-

ing slightly the throttle lever.
Spray XP-S LUBE lubricant through the

throttle body bore to lubricate valve

mechanism.

R1503motr165B

TYPICAL

1. Open throttle body valve
2. Lubricate valve mechanism

Reinstall air intake hose.

Electrical Connections

As necessary, apply anticorrosion

product such as dielectric grease on

battery posts and all exposed cable

connectors.

CAUTION:

Do not lubricate connec-

tors of the Multi-Purpose Electron-

ic Module (MPEM) and the engine

Electronic Control Module (ECM).

Additional Lubrication

XP-S LUBE or equivalent will help pre-

vent corrosion of metallic parts and

maintain proper operation of moving

mechanisms.



WARNING

Do not lubricate the safety lanyard

post.

Ski/Wakeboard Post (if so equipped)

Lubricate ski/wakeboard post through

all its length. Pull out then push in sev-

eral times to distribute the lubricant.

Reverse Gate

Lubricate pivoting points and mecha-

nism.

Throttle Cable Inspection

Throttle Cable

Depress and release the throttle lever.

It should operate smoothly and return

to its initial position without any hesi-

tation. There must be a small amount

of free-play when throttle lever is re-

leased. Refer to an authorized Sea-

Doo dealer if necessary.

CAUTION:

Never attempt to adjust

the idle speed through the throttle

body tamper proof screw. If so, it

would impair the idle speed stabil-

ity. Besides, no adjustment could

be performed by the dealer nor the

factory to correct the idle speed.

The throttle body would need to

be replaced at the customer's ex-

pense. Also take into account that

might change the engine emission

level and the engine might not meet

the EPA/CARB requirements.



WARNING

Do not alter or tamper with throttle

cable adjustment or routing.

_____________________

Содержание GTX 4-GTI











































































































































Результаты поиска

Содержание GTX 4-GTI

Отзывы:

Sea-doo GTX 4-GTI, Руководство оператора, Страница: 97 / 138

Результаты поиска

Содержание GTX 4-GTI

Отзывы: