Sea-doo GTX 4-GTI Скачать руководство пользователя страница 49

Страница: 49 / 138

F00L2TY

1. Latch hole
2. Pin

Engine Compartment

Removing the seat gives access to the

engine, electrical and fuel systems.



WARNING

Certain components in the engine

compartment may be very hot.

Direct contact may result in skin

burn. When starting or operating

the engine, do not touch any elec-

trical part. Never leave any object,

rag, tool, etc., in the engine com-

partment or in the bilge.

18) Seat Cover

(if so equipped)



WARNING

Never sit on the seat cover.

The seat cover allows to install a num-

ber on its side panels. It is removable

to expose the seat for a passenger.
To remove cover:
Unlatch and pull seat out.
Unlock the quarter-turn screws.

F19L07Y

Pull cover tabs each side of seat then

remove cover.
Install seat and properly relatch.
To reinstall cover:
Unlatch and pull seat out.
Position rear of cover in place without

inserting front tabs yet.
Carefully pull tabs outward each side

of seat and insert cover in place.

F19L08Y

Finish pushing cover in position then

lock the quarter-turn screws.
Install seat and properly relatch.

19) Rear Grab Handle

Provides a handhold for boarding

when needed and a handhold for

the passenger or the spotter. See

illustration above.

_____________________

Содержание GTX 4-GTI











































































































































Результаты поиска

Содержание GTX 4-GTI

Отзывы:

Sea-doo GTX 4-GTI, Руководство оператора, Страница: 49 / 138

Результаты поиска

Содержание GTX 4-GTI

Отзывы: