Sea-doo GTX 4-GTI Скачать руководство пользователя страница 79

Страница: 79 / 138

Rough Water or Poor
Visibility Operation

Avoid operation in these conditions. If

you must do so, proceed with caution

and prudence using minimum speed.

Crossing Waves

Reduce speed.
Always be prepared to steer and bal-

ance as necessary.
When crossing wakes, always keep a

safe distance from watercraft ahead.



WARNING

When crossing wakes, slow down.

Operator and passenger(s) can

brace themselves by posting. Do

not jump waves or wakes.

Stopping/Docking

The watercraft is slowed by water

drag. The stopping distance will vary

depending on the watercraft size,

weight, speed, water surface condi-

tion, presence and direction of wind

and current.

F18A03Y

The operator should become familiar-

ized with the stopping distance under

different conditions.
Release the throttle at a sufficient

distance before the expected landing

area.

Reduce speed to idle.
Shift to neutral, reverse or forward, as

required.



WARNING

Directional control is reduced

when the throttle is released

and/or when engine is off.

Beaching

CAUTION:

It is not recommended to

run the watercraft to the beach.

Come slowly to the beach and shut

off the engine using the safety lanyard

before water depth is less than 90 cm

(3 ft) under the lowest rear portion of

the hull, then pull the watercraft to the

beach.

CAUTION:

Riding the watercraft in

shallower water might damage the

impeller or other jet pump compo-

nents.

F18A03Y

CAUTION:

Pay attention, when

leaving the watercraft on the beach,

so that the side vanes do not rub

or hit the ground due to the rock-

ing movement. It might eventually

damage components of the O.P.A.S.

system.

_____________________

Содержание GTX 4-GTI











































































































































Результаты поиска

Содержание GTX 4-GTI

Отзывы:

Sea-doo GTX 4-GTI, Руководство оператора, Страница: 79 / 138

Результаты поиска

Содержание GTX 4-GTI

Отзывы: