Sea-doo GTI Series, Руководство оператора

Страница: 84 / 180

OPERATING INSTRUCTIONS
used when cruising. Experience alone
will dictate the best trim for the condi-
tions. During the watercraft break-in
period, when lower speeds are recom-
mended, it is an excellent opportunity
to become familiar with trim adjust-
ment and its effects.
When the nozzle is positioned in an
upward angle, the water jet directs the
bow of the watercraft upward. This po-
sition is used to optimize high speed.
When the nozzle is directed down-
ward, the bow is forced downward
and increases the watercraft turning
capabilities. As with any watercraft,
speed and operator body position and
movement (body English), will deter-
mine the degree and sharpness of the
watercraft turn. Porpoising can be re-
duced or eliminated if the nozzle is
downward and speed is adjusted pro-
portionately.
NOTE: VTS position is indicated on a
bar gauge in the information center.
VTS POSITION INDICATION
The VTS system allows for manually
adjusting the trim position of the noz-
zle, or selecting two preset trim posi-
tions and recording or changing preset
trim positions on certain models.
VTS Trimming Methods
AVAILABLE VTS TRIMMING METHODS
GTI/
GTI 130
GTI SE
GTI
Limited
GTR WAKE
VTS trim button N.A. N.A X X N.A
VTS "Double Click"
trimming
N.A. N.A X X N.A
VTS "Presets"
N.A. N.A X X N.A
VTS trimming through
multifunction gauge
N.A. X N.A. N.A. X
X = Indicates a standard feature
N.A. = Not Available
Trimming the VTS Using the VTS
Button
Five trim positions are available.
With the watercraft operating in for-
ward position, proceed as follows:
1. Press the VTS UP button once to
trim the bow of the watercraft up to
the next trim position.
NOTE: Pressing the VTS trim button
without the engine in forward position
will only change the indication. The
nozzle will move to the selected VTS
trim position when forward position is
engaged.
2. Press the VTS DOWN button once
to trim the bow of the watercraft
down to the next trim position.
82
______________