Sea-doo GS 5626 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 96

background image

9

BOMBARDIER LIMITED WARRANTY:
1998 SEA-DOO

®

WATERCRAFT

1. WARRANTY COVERAGE PERIOD

BOMBARDIER INC. ("Bombardier"), as manufacturer, warrants FROM THE DATE
OF DELIVERY TO THE FIRST CONSUMER that each 1998 SEA-DOO watercraft
sold, as NEW and UNUSED and PREDELIVERED by an authorized North Ameri-
can SEA-DOO watercraft dealer, will be free from any defects in material and/or
workmanship for a PERIOD of:

TWELVE (12) CONSECUTIVE MONTHS, for private use owners, or

FOUR (4) CONSECUTIVE MONTHS for commercial use owners.

All genuine Bombardier accessories, installed by an authorized SEA-DOO

water-

craft

dealer at the time of delivery of the new and unused SEA-DOO

watercraft

,

carry the same Warranty Coverage Period as for the SEA-DOO watercraft.

2. WHAT BOMBARDIER WILL DO

BOMBARDIER will repair or replace, at its option, all genuine BOMBARDIER
parts found defective in material and/or workmanship, under normal use, main-
tenance and service, with a genuine BOMBARDIER part without charge for parts
and labor, at any authorized SEA-DOO

watercraft

dealer during the Warranty

Coverage Period.

3. CONDITION TO HAVE WARRANTY WORK VALIDATED

The customer must notify an authorized SEA-DOO watercraft dealer within two
(2) days of the appearance of the defect in material and/or workmanship and
present to the servicing authorized SEA-DOO

watercraft

dealer the SEA-DOO

Warranty Registration Card or a proof of purchase of the NEW and UNUSED 1998
SEA-DOO watercraft and must sign the repair/work order prior to the start of the
repair in order to validate a warranty repair. All parts replaced under this limited
warranty become the property of BOMBARDIER.

4. EXCLUSIONS - ARE NOT WARRANTED

• Normal wear and tear items;
• Labor, parts and lubricant costs of all maintenance services;
• Damage caused by failure to provide proper maintenance and/or storage, as

described in the “1998 SEA-DOO watercraft Operator's Guide”;

• Damage resulting from improper repairs, modifications or use of non-approved

parts or, repairs done by a non-authorized SEA-DOO

watercraft

dealer;

• Damage resulting from abuse, misuse, neglect, racing;
• Damage resulting from accident, fire, theft, vandalism or any act of God;
• Incidental or consequential damages, or damages of any kind such as but not

limited to towing charges, telephone calls or taxi;

• Water damages caused by water ingestion;
• Damage related to gel coat finish including but not limited to cosmetic gel coat

finish, blisters or fiberglass delamination caused by blisters, crazing, spyder or

hairline cracks; and

• Damages resulting from improper service or maintenance.

smo9801a.bk : smo9801a.fm5 Page 9 Wednesday, August 13, 1997 2:07 PM

www.SeaDooManuals.net

«
...
9
10
11
12
13
...
»

Содержание GS 5626

































































































Отзывы:

Нет отзывов

Похожие инструкции для GS 5626

Бренд: Bangor Punta Marine Страницы: 49

2014 Ski 200 - OB

Бренд: Nautiques Страницы: 272

Dolphin 8.8' Air Floor

Бренд: Sport Boats Страницы: 16

Бренд: Outcast Страницы: 7

Бренд: LaserPerformance Страницы: 16

Бренд: LaserPerformance Страницы: 21

Бренд: Hunter Страницы: 23

Бренд: Dehler Страницы: 63

Packraft FamilyRaft

Бренд: Nortik Страницы: 9

Бренд: Nortik Страницы: 11

Бренд: Nortik Страницы: 29

Performance H2X

Бренд: Baja Страницы: 83

Бренд: HydroBikes Страницы: 24

ST70 Instrument

Бренд: Raymarine Страницы: 42

Бренд: Zodiac Страницы: 302

Бренд: Yamaha Страницы: 146

Бренд: udir/c Страницы: 12

Бренд: Latrex Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды