Sea-doo 2012 GTX 155 Скачать руководство пользователя страница 39

Страница: 39 / 192

IMPORTANT ON-PRODUCT LABELS

IBR INTELLIGENT BRAKE

AND REVERSE FUNCTIONS:

How to brake

Squeeze brake lever

How to reverse

Maintain

brake lever

engaged

How to go forward

Tap throttle lever to engage

forward movement from neutral

position.

Squeeze

throttle lever to

accelerate.

How to get to neutral

Tap brake lever

Refer to the operator's guide for

more information.

Collisions result in more

INJURIES AND DEATHS

than any other type of accident for personal

watercraft (PWC).

TO AVOID COLLISIONS:

SCAN CONSTANTLY

for people, objects, and other watercraft.Be alert for conditions that

limit your visibility or block your vision of others.

OPERATE DEFENSIVELY

at safe speeds and keep a safe

distance away from people, objects, and other watercraft.

Do not follow directly behind PWCs or other boats.

Do not go near others to spray or splash them with water.

Avoid sharp turns or other maneuvers that make it hard for

others to avoid you or understand where you are going.

Avoid areas with submerged objects or shallow water.

TAKE EARLY ACTION

to avoid collisions. Remember, generally PWCs and other

boats do not have brakes.

DO NOT RELEASE THROTTLE WHEN TRYING TO STEER

away from objects

- you need throttle to steer. Always check throttle and steering controls for

proper operation before starting PWC.

Follow navigation rules and province/ state and local laws that apply to PWCs.

See Operator's Guide for more information.

Seating is limited to one operator and two passengers (600 lbs./ 273 kg).

iBR INSTRUCTIONS

219903316

LABEL 16: GTX, WAKE, RXT AND RXT-X MODELS

________

SAFETY INFORMATION

________

Содержание 2012 GTX 155

































































































































































































Результаты поиска

Содержание 2012 GTX 155

Отзывы:

Sea-doo 2012 GTX 155, Руководство оператора, Страница: 39 / 192

Результаты поиска

Содержание 2012 GTX 155

Отзывы: