Sea-doo 2012 GTX 155 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 192

Sea-doo 2012 GTX 155 Скачать руководство пользователя страница 18

SPECIAL SAFETY MESSAGES

– Use a tow rope of sufficient length

and size and make sure it is ad-
equately secured to your water-
craft. While some watercrafts are
equipped or can be fitted with a
specially designed towing mech-
anism, avoid installing a tow pole
on a PWC. It can become a hazard
should someone fall on it.

– Give immediate attention to a per-

son who has fallen. He or she is
vulnerable in the water alone and
may not be seen by other boaters.

– Approach a person in the water from

the lee side (opposite the direction
of the wind). Turn off the motor be-
fore coming close to the person.

– Participate in water sports only

in safe areas.

Stay away from

other boats, channels, beaches,
restricted areas, swimmers, and
heavily traveled waterways and un-
derwater obstructions.

– Turn off the engine and anchor the

watercraft before swimming.

– Swim only in areas designated as

safe for swimming. These are usu-
ally marked with a swim area buoy.
Do not swim alone or at night.

F00A2LY

SWIM AREA BUOY

– Do not water ski between sunset

and sunrise. It is illegal in most ar-
eas.

– Do not drive the watercraft directly

behind a water skier, tuber or wake-
boarder. At 40 km/h (25 MPH) per
hour, the watercraft will overtake a
person who falls in the water 60 m
(197 ft) in front of your watercraft in
about 5 seconds.

– Shut off the engine and remove the

tether cord from the engine cut-off
switch when anyone is in the water
nearby.

– Stay at least 45 m (148 ft) away

from areas marked by a diver down
float.

Avoid personal injury!

Do not allow

anyone near the propulsion system or
intake grate, even when the engine
is off. Items such as long hair, loose
clothing or personal flotation device
straps can become entangled in mov-
ing parts resulting in serious injury or
drowning. In shallow water, shells,
sand, pebbles or other objects could
be drawn up by the jet pump and be
thrown rearward.

F00A2MY

DIVER DOWN FLOAT

For more information on approved, le-
gal and safe practice of water sports,
please contact the local legal authority
on water sports safety for the area you
plan to practice in.

Hypothermia

Hypothermia, the loss of body heat
resulting in a subnormal body temper-
ature, is a significant cause of death in

16

_______

SAFETY INFORMATION

________

«
...
16
17
18
19
20
...
»

Содержание 2012 GTX 155

































































































































































































Отзывы:

Нет отзывов