Sea-doo 2004 3D RFI Скачать руководство пользователя страница 113 | Manualshive

Страница: 113 / 118

background image

7. LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY AND
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED,
THE IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE
EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE
EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME JURISDIC-
TIONS DO NOT ALLOW FOR THE DISCLAIMERS, LIMITATIONS AND EXCLU-
SIONS IDENTIFIED ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE
OTHER LEGAL RIGHTS WHICH MAY VARY FROM COUNTRY TO COUNTRY.

Neither the BRP distributor nor any other person has been authorized to make any
affirmation, representation or warranty regarding the product, other than those
contained in this limited warranty, and if made, shall not be enforceable against
BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

8. TRANSFER

If the ownership of a product is transferred during the warranty coverage period,
this warranty shall also be transferred and be valid for the remaining coverage
period provided BRP is notified of such transfer of ownership in the following
way:

BRP or an authorized BRP distributor/dealer receives a proof that the former
owner agreed to the transfer of ownership, in addition to the co-ordinates of the
new owner. The distributor will then forward this information directly to BRP.

9. CONSUMER ASSISTANCE

(a) In the event of a controversy or a dispute in connection with this BRP limited
warranty, BRP suggests that you try to resolve the issue at the dealership level.
We recommend discussing the issue with the authorized dealer's service man-
ager or owner.

(b) If further assistance is required, the distributor's service department should
be contacted in order to resolve the matter.

(c) If the matter still remains unresolved then contact BRP at the address listed
below.

BOMBARDIER RECREATIONAL PRODUCTS INC.

CUSTOMER SERVICES GROUP
VALCOURT QC J0E 2L0
Tel.: 1 (819) 566-3366

©

2004 Bombardier Recreational Products Inc. All rights reserved.

®

Registered trademark and

TM

trademark of Bombardier Recreational Products

Inc. or its affiliates.

_____________________

115

www.SeaDooManuals.net

«
...
111
112
113
114
115
...
»

Содержание 2004 3D RFI























































































































Отзывы:

Нет отзывов

Похожие инструкции для 2004 3D RFI

Бренд: PURSUIT Страницы: 142

Бренд: Jeanneau Страницы: 95

3372 Express Series

Бренд: Cruisers Yachts Страницы: 106

CASCADE BT-21CAP

Бренд: Aqua-Marina Страницы: 68

Бренд: Reely Страницы: 44

GTX 4-TEC 5573 2002

Бренд: Sea-doo Страницы: 505

Бренд: Tahe Страницы: 20

Бренд: SEALVER Страницы: 16

Бренд: World Cat Страницы: 74

Бренд: World Cat Страницы: 91

Бренд: World Cat Страницы: 98

Бренд: Lagoon Страницы: 122

Бренд: Lagoon Страницы: 31

Black Marlin BL

Бренд: Rage Страницы: 20

Бренд: Nautiraid Страницы: 20

Бренд: Jeanneau Страницы: 97

WaveRunner VXS 2014

Бренд: Yamaha Страницы: 98

XL700Y WaveRunner

Бренд: Yamaha Страницы: 105

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды