Connecting the Strobe
E-19
Attaching the Optional Accessories
Fiber-optic cable
socket cap
When using the Optical YS Converter/C for MDX housing, you must
also use a Fiber-Optic Cable II to connect each strobe.
2
Insert the fiber-optic cable's
connector into the socket until
it stops
Remove the fiber-optic cable
socket caps
Do not remove the caps from fiber-
optic cable socket not in use to keep
light from entering in.
1
CAUTION
Before inserting the fiber-optic cable, check to make sure that there are no
scratches or dirt on the connector surface. Scratches or dirt may cause the
strobe to malfunction.
To protect the surface from scratches or dirt, do not remove the caps from
the fiber-optic cable sockets when the cable is not inserted.
There is no possibility of water leaking from the fiber-optic cable socket
even if the fiber-optic cable/cable socket cap is removed underwater.
After the strobe is connected to the housing, make sure to check that the
connected strobe functions correctly before underwater use.
