Se-Kure Controls,
®
Inc.
3714 Runge Street • Franklin Park, IL 60131 • 1-(800) 322-2435 • (847) 288-1111 • Fax: (847) 288-9999
Rev. 4/30/01
SCI-9642
©2000 Se-Kure Controls,
®
Inc.
On the Web: www.se-kure.com
E-Mail: [email protected]
4.
1. Open the battery compartment door to reveal
the dip switches on the side of the
SK-800ME
I
Alarm Module, as shown in
Fig. 10.
2. Unscrew and open the SK-882 Infrared
Remote. It is fastened together with a small
phillips head screw, shown in Fig. 11.
3. Arrange the Dip Switches into any
configuration to create your own encoded
signal. Make sure the Dip Switches match
on the Alarm Module and the Infrared
Remote Transmitter.
Note: It is highly recommended that you change
the Dip Switch settings from the factory default.
This protects the system from being tampered by
anyone with an infrared remote set on the facto-
ry default.
4. Close the Alarm Module and the Infrared
Remote Transmitter.
Setting Up The Infrared Remote:
Dip Switches
Fig. 11
SK-882 - Infrared
Remote Transmetter
Dip Switches Battery
Fig. 10
