background image

Rev. 1/27/99

©1999 Se-Kure Controls

®

, Inc.

SCI-9629

The “LE PLUS”

Display Merchandise Alarm System

SK-195
AC/DC Power Supply

SK-107LE

“LE” Splitter Box

SK-10106LE

“LE” Strip Alarm w/6 Ports

SK-10112LE “LE” Strip Alarm 
w/12 Ports (not shown)

SK-103LE
“LE” Alarm Module

Coupler

Protected with the

SK-943P/LE - Lens (shown in inset)

6’ (Str. Wire) Tie Sensor

SKD-0443 - Camera with Lens

(shown above)

6’ (Coiled) Dual Sensor

(Rectangular & Tie Sensors)

Protected with the

SKD-0453PC/LE

6’ (Coiled) Dual Sensor

(Collar Lasso & Rect.)

Protected with the

SK-953PC/LE

6’ (Coiled) 

Collar Lasso Sensor

Protected with the

SK-904PC/LE

6’ (Coiled) Rectangular Sensor

Protects All
Kinds of
Display
Merchandise

The parts you need, when you need them!

SE-KURE CONTROLS

®

, INC.

3714 Runge Street

Franklin Park, IL 60131

(847) 288-1111

Toll Free 1-800-322-2435

Fax (847) 288-9999

SK-103LE

“LE” Alarm Module

“LE” Splitter Box w/6 Modular Plugs

SK-107LE

SK-103XLE

“LE” Alarm Module w/External Horn

SK-10112LE

“LE” Strip Alarm w/12 Modular Plugs

SK-10106LE

“LE” Strip Alarm w/6 Modular Plugs

SK-1912

Rectangular Removal Tool

))) Extra Loud (((

External Horn

SK-909

Ant Sensor Adhesive Pads

SK-905

Rectangular Sensor Adhesive Pads

SK-195

AC/DC Power Supply

SK-961PC/LE

6' (Coiled) Ant Sensor w/Tie-Wrap

SK-953PC/LE

6' (Coiled) Collar Lasso Sensor

SK-904PC/LE

6' (Coiled) Rectangular Sensor

SKD-0453PC/LE

6' (Coiled) Dual Sensor (Collar Lasso & Rect.)

Stop Display Product Theft!

The “LE PLUS” Alarm System protects all Display

Merchandise, using the (SK-103LE) Kord Kontrol Alarm
Module, SK-103LE Splitter Boxes, (SK-10106LE) & (SK-
10112LE) Strip Alarms.

Each sensor is plugged into a Splitter Box or Strip

Alarm and connected to display merchandise with high
strength “Super Adhesive”, (safe for all product surfaces).
Sensors come with 6 ft. flexible coiled cable, and are
available with Rectangular, Tie, Lassoing and Dual
Sensor Ends to protect virtually any display product.

The “LE PLUS” Alarm System is the first system to

take the guesswork out of security!  This one-of-a-kind
sensor with its unique “LE” Light changes from WHITE
(not connected) to GREEN (connected to a Splitter Box
or Strip Alarm) to RED (connected to your display prod-
uct).

Ideal security for Radios, Telephones, TV’s and VCR’s

as well as Power Tools, this sensor VISUALLY tells sales
associates, security personnel and customers, “I am
Working
”.

Camcorders

Binoculars

Cameras & Lenses

Drills

Use any combination of:

(SK-107LE) Splitter Boxes & 

(SK-10106LE or SK-10112LE) “LE” Strip Alarms 

in your system to protect up to 72 SKU’s.

Содержание LE PLUS




















Отзывы: