Please keep these operating instructions for future reference and maintenance.
+44 (0)1543 443060
Subject to technical modifications. Diagram is not binding.
www.secontrols.com
1.1 General Safety Information
SE Controls reserves the right to introduce any
modifications and improvements to the contents of this
publication without the obligation of giving prior notice.
Read and observe the information contained in these
safety instructions and respect the order of procedure
stated therein.
Please keep these safety instructions for future
reference and maintenance. Reliable operation and
the prevention of damage and risks are only granted
if the equipment is assembled carefully and the
settings are carried out according to these
instructions and to the operating instructions of the
drives.
Please observe the exact terminal assignment, the
minimum and maximum power ratings (see technical
data) and the installation instructions.
Please observe the following warning symbols
:
Warning!
Carefully ready these warnings
Warning!
Draws attention to instructions that must
be followed in order to prevent damage to
the actuator.
Notice
Indicates important notices to which
attention must be paid.
Danger!
General danger or precautionary warning
with numerous implications.
Danger!
Danger that could cause personal injury.
Danger of hands been crushed!
Warning!
Danger of electric shock.
1.2 Health and Safety
Electrical Safety; Warning 230 V AC Dangerous
voltage. Can cause death, serious injury or
considerable material damage. Disconnect the
equipment from the power supply at all poles
before opening, assembling or carrying out any
structural alterations.
Warning! Never connect the drives to 230V!
They are built for 24V! Risk of death!
Personal Protective Equipment; It is
recommended that suitable PPE is worn at
all times during the installation and connection of
actuator products in accordance with a recommended
safe system of work.
Handling and storage; Care must be taken in
transportation to the installation location and during
fitting. Actuator products must not be dropped,
impacted, allowed to get wet or abused in any other way.
Mishandling can result in serious damage.
Competence; Installation and connection must only be
carried out by authorised, competent and safety
conscious persons.
1.3 Environmental
All actuator products contain metallic, plastic
and electronic parts. Redundant electronic
products are classified as hazardous waste
under the WEEE regulations (Waste Electrical
and Electronic Equipment). Electronic parts must be
disposed by an authorised and licensed recycler.
They must not be disposed of in ‘general waste’ skips.
Consult SE Controls for assistance.
