Please keep these operating instructions for future reference and maintenance.
+44 (0)1543 443060
Subject to technical modifications. Diagram is not binding.
www.secontrols.com
1.6 Maintenance
Always disconnect the motor’s supply voltage and batteries
during cleaning or maintenance operations, especially if the
actuator is equipped with an automatic control device.
The
system must be protected against
unintentional re-starting.
All smoke ventilation systems must be
periodically (annually) checked, serviced,
maintained and, if necessary, repaired and re
tested by a authorised, trained and competent,
safety conscious persons.
Maintenance shall be carried out in accordance with the
requirements of;
•
Building regulations 2002
•
Health and Safety at Work Act 1974
•
I.E.E Regulations
•
Regulatory Reform (Fire Safety) Order 2005
In order to keep the equipment in optimum operating
condition it is recommended that ventilation systems are
similarly maintained.
There are no user repairable parts in this equipment.
Basic checks that can be carried out include;
•
At least once a year, check that the
power cable and connection has not been
damaged and that it shows no sign of wear
•
Check that no object obstructs the window
movement.
•
If faults arise, never work on the actuator and
never open or dismantle parts of the actuator that
deny access to the inside of the mechanism.
•
If the actuator fails to function or is damaged,
contact SE Controls.
•
Do not use the actuator until it has been repaired.
A suitable service contract with SE Controls is
recommended for this purpose.
The gear system is greased for life and is maintenance free.
Defective equipment must only be
repaired by SE Controls. Only original
spare parts are to be used.
After maintenance, repair or any changes to the system
check all functions by a trial run.
