SDLG LG958L страница 78 Скачать руководство пользователя

Страница: 78 / 128

Operation & Maintenance Manual

──

LG958L/LG959 Wheel Loader

When adjusting the cab’s seat, park the machine in a safe

place and stop the engine.

Adjust the cab’s seat before starting operation or replacing

the operator.

Make sure that you can depress the brake pedal completely

when your back is against the seat backrest.

Weight Adjustment

The weight adjustment handle is in the middle of seat bottom.

Turn the handle anticlockwise to reduce the damping stiffness

and turn clockwise to increase the damping stiffness. Rotate

the damping stiffness adjust handle A by hand according to the

operator’s weight until feel comfortable.

Fore-and-Aft Adjustment

This handle is on the left bottom side of the seat. Pull the

fore-and-aft handle B and move the seat forward or backward to the desired position; it will lock

automatically after pushing it down.

Backrest Angle Adjustment

Put the backrest angle adjust handle C upward to pull the backrest until the angle is comfortable.

The backrest angle is locked when loose the handle.

Height Adjustment

There are three positions for the height of seat, and the operator can adjust according to the need.

During adjusting, set the base under the seat by two hands and draw up forcibly and stably. When

the cracking sound is sounded, please loose your hands, then the seat will fix in this position.

Adjust the position of seat to the highest position and draw up forcibly, and then press down, the

seat will fall to the lowest position.

Headrest Height Adjustment

Set the headrest of seat by two hands, and then draw up or press down forcibly to adjust the

height of headrest.

1.2.11 Use of Safety Belt (if assembled)

If the safety belt is assembled on the seat, please tie it when operating the machine. Before using

safety belt, please check the degree of wear and firm. Replace it if it is necessary.

Adjust the length of safety belt before using to make sure the safety belt can be used for safety

guarantee and comfort. Move the position of lock on the safety belt to adjust the length of safety belt.

Содержание LG958L

































































































































Результаты поиска

Содержание LG958L

Отзывы:

Похожие инструкции для LG958L

Бренды по названию

Популярные бренды

SDLG LG958L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание LG958L

Отзывы:

Похожие инструкции для LG958L

Бренды по названию

Популярные бренды