Scytek electronic GALAXY 5100RS SERIES, Руководство по эксплуатации продукта

Страница: 6 / 48

The 2-way Color remote transmitter is offering increased range and confirmation of any activated feature.
Page 1
Button 1 Arms and Locks* the system and when held for 5 seconds, activates the system’s Panic feature.
Button 1 also locks the doors when the system is in Valet Mode.
Button 2 Disarms and Unlocks* the system. Pressing Button 2 again operates the Passenger Unlock feature
(if installed). Button 2 also unlocks the doors when the system is in Valet Mode.
Button 3 Activates the Auxiliary 1 output normally used for trunk release (note trunk icon on button).
Button 4 Activates the Remote Start feature.
Button 5 is the Confirmation, Programming and the Page Shift button. Quickly pressing button 5 will activate
the Page 2 function. Pressing button 5 for 2 seconds activates the system’s confirmation feature which
will then display the current status of the system (armed, disarmed, engine running, etc.).
Page 2
Button 1 Silently Arms*/Locks the system.
Button 2 Silently Disarms*/Unlocks the system.
Button 3 Activates the Auxiliary 2 output.
Button 4 Aux 3 or Factory Rearm output.
Button 5 Not Implemented.
Page 3 & 4 are used as Page 1 & 2 for second car operation
System Confirmation
The 2-way transmitter's confirmation feature allows the current vehicle status to be displayed at any time.
To display system status:
1. Press and hold Button 5 until the display shows CONFIRM.
· The transmitter will beep once.
2. Release Button 5.
· The transmitter will beep once.
· The panel will display the current system status.
Button 1
Button 2
Button 3
Button 4
Button 5
11/16 3:10P
Battery
status
wakeup
alarm
enabled
autostart
enabled
22-W WA AY Y CCO OLLO OR R LLCCD D R REEM MO OTTEE TTR RA AN NSSM MIITTTTEER R D DEESSCCR RIIPPTTIIO ON N
Page 2 - Galaxy 5100RS