G5.2W, G2.2W, A4.2W, A1.2W - Page 25
2.
Auto Rearming Mode.
When selected, the system will automatically re-arm 30 seconds after it is
disarmed .
Restart Mobilink
- Reset Mobilink (Galaxy Mobile) module.
3.
Arming Chirps.
Selects between normal and silent operation.
Bypass Data Bus Module
- set Bypass module to iDataLink
4.
Ignition Door Locking / Override Code Set.
This dual program branch selects Ignition Door
Locking, and programs the optional Emergency Override Code.
Ignition Door Locking. Selects whether or not the system will automatically lock the doors 10 seconds
after the ignition key is turned on.
Override Code Set. Changes the Emergency Override Code for a higher level of security.
Bypass Data Bus Module
- set Bypass module to Fortin
5.
Ignition Door Unlocking.
Selects whether or not the system automatically unlocks the doors when
the ignition is turned off. The Ignition Door Locking feature may be programmed to unlock all doors or
the driver’s door only. If driver’s door only is selected, the optional Passenger Unlock wire must be
connected. (
See Two Stage Door Lock Diagrams)
6.
Door Unlock Pulse.
Selects between one pulse or two pulse operation for the door unlock output.
Many new import vehicles’ factory door locking systems require two pulses on the proper wire to unlock
the doors. These systems can be interfaced directly without the use of relays or any additional circuitry
by programming the system for double unlock pulse.
7.
Door Lock Pulse Length.
Selects between a 1, 3 or 0.1 seconds output for door locking and
unlocking. Program to 3 seconds for vehicles equipped with vacuum door locking systems.
8.
Passive Door Locking.
Selects whether or not the system will automatically lock the doors during
Passive Arming and Auto Rearming mode.
9.
Remote Start Confirmation Chirps.
When enabled, system chirps before starter activated. When
disabled, no chirps will sound upon start.
Enable Auxiliary Start Activation.
Enable to use the auxiliary start feature.
10.
Ignore Open Door Report.
Bypasses the open zone warning chirps for vehicles equipped with a
residual dome light circuit that remains on for a period of time after closing the door.
Temperature display mode:
set to Fahrenheit for 2W pager display.
11.
Auxiliary 1 Mode.
Selects from momentary, 10 second timed, or latched operation for Auxiliary 1.
Momentary operation provides an output for as long as the transmitter button is pressed.(1-way
remote only)
Timed operation provides an output that turns on for 10 seconds each time the transmitter button is
pressed. If the button is pressed again during the 10 seconds, the output will turn off.
Latched operation provides an output that turns on when the transmitter button is pressed and
remains on until the transmitter button is pressed again.
Temperature display mode:
set to Celsius for 2W pager display.
12.
Auxiliary 2 Mode.
Selects from momentary, 10 second timed, or latched operation for Auxiliary 2.
Momentary operation provides an output for as long as the transmitter button is pressed.(1-way
remote only)
Timed operation provides an output that turns on for 10 seconds each time the transmitter button is
pressed. If the button is pressed again during the 10 seconds, the output will turn off.
Latched operation provides an output that turns on when the transmitter button is pressed and
remains on until the transmitter button is pressed again.
