manualshive.com logo in svg

Scytek electronic A1.1 SERIES, Руководство по эксплуатации продукта, Страница: 36 / 37

Поделиться
Скачать
Scytek electronic A1.1 SERIES Скачать руководство пользователя страница 36

Page 32 -  G5.2W, G2.2W, A4.2W, A1.2W

FCC ID: OARRXAM2000

This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:

1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause

undesired operation

Technical Information

Built-in LED Light/Override/Valet/Call Switch into        

Antenna

RS-2W Models

RS Models

Valet Switch

LED light

Valet/Call/Override Switch

LED Light

Starter Diagnostics

Starter doesn’t start and parking lights flash:

3  Times - 

Engine RPM not detected (check tach wire and/or perform tach learn procedure)

Hood Trigger is active (hood is open, wire is shorted to ground or pin switch is

defective)

5  Times - 

Unit is in Valet (service) mode, and start is disabled.

6  Times - 

Emergency Brake Disengaged   ( Manual Transmission )

7  Times -

Remote start not ready            ( Manual Transmission )

8  Times - 

Brake Trigger is active ( Brake switch input is shorted to ground or incorrect)

Содержание A1.1 SERIES






































Отзывы:

Нет отзывов