4641 East Ivy Street, Mesa, AZ 85205 | (480) 256-0017 | [email protected] | SCYNCE.AG
8
the science of yield
MAINTENANCE
WARNING
• High Voltage - Switch off the main voltage before commencing maintenance work.
• Caution - Fixture reaches high temps while in use.
• Do not open or disassemble the product. Opening the product can prove hazardous and will void the warranty.
• Caution - Risk of Fire
• Caution - Risk of shock
ATTENTION
ATTENTION
• Check the product at regular intervals for build-up of dust and dirt. Clean the product if necessary.
Contamination can lead to overheating and reduced light output performance.
• Clean the fixture with water and a damp cloth or a polycarbonate safe cleaner such as Novus #1 Cleaner.
Ensure that the polycarbonate lens is always clean.
In the event that the product is defective or damaged, contact the dealer from whom you purchased the fixtures, or
SCYNCE directly. Never switch on a defective or damaged fixture.
Do Not remove or
damage the Gore
breathers. Removal or
damage of the breather
could allow condensation
and contaminants to
enter the fixture.
Gore Breather
(white)
• Always allow the fixture to cool to room temperature before cleaning it.
• Never clean the fixture with corrosive cleaning agents or other aggressive liquids. The following cleaners are
known to cause damage to polycarbonate.
o Solvents; Acetone, Alcohol…
o Window Cleaner; Windex, 409…
o Alkaline Cleaners
• Never use abrasive cleaners, abrasive pads, or gritty cloths to clean, the polycarbonate lenses will scratch.
• Never scrape the polycarbonate lenses to remove build-up. Only use a vinegar and water solution (1:100 ratio)
to remove build-up of limescale on the lens.
