QUARTZ MULTI-FUNCTION MODELS – TYPE A
with small date and 24-hour hands
Includes FXX (SF 155.1) multi-function watch models
Legend
1, 2, 3
– Crown positions
H
– Hour Hand
M
– Minute Hand
S
– Seconds Hand
D
– Date Indicator
F
– 24-Hour Hand
These multi-eye models feature center-mounted hour, minute and
seconds hands, and small date and 24-hour indicators.
To set the TIME:
1. Pull crown out to position 3 when seconds hand
S
reaches 12
o’clock; watch (seconds hand
S
) stops.
2. Turn crown in either direction to set hour
H
and minute
M
hands
to desired time, taking AM/PM time into account.
3. Push crown back in to position 1; watch (seconds hand
S
) restarts.
NOTE: 24-hour hand
F
will move in sync with hour hand
H
, so when
setting the time, be sure to take AM/PM time into account so that
24-hour hand is set correctly.
When setting the minutes, advance minute hand
M
4 to 5 minutes
ahead of the desired time, then turn it back to indicate the exact
minute.
To set the DATE:
1. Pull crown out to position 2.
2. Turn crown counterclockwise until date indicator hand
D
points
to correct date.
NOTE: Date indicator hand
D
will not move when crown is turned
clockwise.
3. Push crown back in to position 1.
IMPORTANT: Do not adjust the date between the hours of 9:00 PM
and 1:00 AM when automatic calendar changes are in progress or the
date may not change automatically on the following day.
NOTES: While setting date indicator hand
D
, check to make sure that
it is moving properly in one-day increments.
It will be necessary to adjust the date following any month with fewer
than 31 days.
Figure A
H
S
F
D
1 – 2 – 3
M
