QUARTZ ANALOG CHRONOGRAPHS 1/1 OF A SECOND – TYPE B
with small chronograph minutes/seconds counters and 24-hour hand
Includes Paddock (SF 104, 104.1) quartz chronograph models
Legend
1, 2
– Crown positions
Button
A
– Start/Stop
Button
B
– Reset
H
– Hour Hand
M
– Minute Hand
S
– Normal Seconds Hand
C
– Chronograph Seconds Counter
E
– Chronograph Minutes Counter
F
– 24-Hour Hand
These chronograph models feature a minute counter (up to 60),
seconds counter, and small 24-hour hand. They can be used to
time an event up to 59 minutes and 59 seconds in duration to the
nearest second.
To set the TIME:
NOTE: Before setting the time, make sure chronograph measurement
is stopped and both chronograph hands have been returned to zero
position at 12 o’clock.
1. The instant Seconds hand
S
reaches the 12 o’clock position,
pull crown out to position 2; watch stops.
NOTE: Do not press button
A
or
B
, otherwise chronograph hands
will move.
2. Turn crown in either direction to set Hour
H
, Minute
M
and
24-Hour
F
hands to desired time.
NOTE: 24-hour hand
F
will move in sync with Hour hand
H
, so when
setting the hour, make sure 24-hour time is set properly.
3. Take an accurate time signal (from a radio news station, for exam-
ple). When the audible tone signals the exact time, push crown back
in to position 1; watch will restart, now set to the exact time.
To RESET Chronograph Hands:
Before setting the time or running the stopwatch, make sure
chronograph counter hands
C
and
E
are in the zero position at
12 o’clock. Follow these steps as needed to reset the counter hands
following a battery change or in the event of an error:
1. Pull crown out to position 2.
2. Press Button
A
to set Chronograph Seconds hand
C
to zero;
to advance hand
C
rapidly, press and hold Button
A
.
NOTE: Chronograph Minute hand
E
is synchronized automatically
with Chronograph Seconds hand
C
.
3. Once Chronograph hands
C
and
E
have been reset to zero
position, reset the time and push crown back into position 1.
Operating the CHRONOGRAPH
This stopwatch is able to measure and display time in 1 second
increments up to a maximum of 59 minutes/59 seconds. It will
stop automatically after running continuously for 60 minutes.
Measured time is indicated by Chronograph Minute
E
and
Seconds
C
hands which move independently of the center-mounted
and 24-hour watch hands.
Simple chronograph functions:
1. Press button
A
to start chronograph.
2. Press button
A
a second time to stop chronograph.
3. Press button
B
to reset chronograph to zero.
Accumulated time functions:
To measure the combined time of a series of shorter events, for exam-
ple the actual playing time of a football game, where play is repeated-
ly interrupted:
1. Press button
A
to start chronograph.
2. Press button
A
a second time to stop chronograph and read
elapsed time.
3. Press button
A
again to resume measurement.
4. Press button
A
a fourth time to stop chronograph again, and
read new elapsed time.
NOTE: Each time you stop chronograph, chronograph hands will
indicate total accumulated time.
5. Repeat steps 1 and 2 to add each additional interval of time.
6. After you have taken your final accumulated time reading,
press button
B
to reset chronograph hands to zero.
Split-time or intermediate-time functions:
To take intermediate time readings as a race progresses:
1. Press button
A
to start chronograph.
2. Press button
B
to momentarily stop chronograph and read
the intermediate time.
3. Press button
B
to resume chronograph function; the
2 chronograph hands will quickly catch up with ongoing event.
Repeat steps 2 and 3 as many times as needed to take additional
split times.
4. Press button
A
to stop chronograph, and take a reading of
the final time.
5. Press button
B
to reset chronograph hands to zero.
1 – 2
A
Figure A
H
E
S
M
B
F
C
