ScubaJet SJ 2, Руководство пользователя

Страница: 14 / 39

14
Once the SCUBAJET is set up, go to relevant section with your activity as follows:
For the use on a SUP go to section 5
For the use while snorkeling, swimming and diving go to section 6
For the use on a dinghy, canoe, kayak or Kayacat go to section 7
4.2. SETTING UP THE BATTERY
Connecting the two units
This section only applies to the battery type 2x100Wh. For other batteries (4x100Wh) skip this section
and go to the next section „Charging the battery“.
1 Remove the foam rubber between the two
units. 2 Connect the 2 units by pushing them together
until there is no more space between the
units.
3 Tighten the 2 screws clockwise on the top
of unit 2. For the right strength, tighten the
screws only hand-tight.
No Tool, using a tool
could break the screws.
4 The screws can stay tightened, unless you
would like to take the SCUBAJET battery
2x100Wh on a plane. In that case, open up
the screw counterclockwise and put the foam
rubber between the two units.