ScubaJet SJ 2, Руководство пользователя

Страница: 8 / 39

8
What to do when SCUBAJET is not in use
When not in use, always turn the function ring to the off position.
After use, always take the SCUBAJET out of the water.
Always remove the battery from the unit when not in use.
Do not store the battery in the unit.
How to handle SCUBAJET
properly
Only run the SCUBAJET when under water.
The SCUBAJET has an integrated protective
device that switches the motor off when the
SCUBAJET is out of the water, so the sealing
rings won’t get damaged.
When removing the battery from the tube,
just pull the metal ring and remove the battery.
Never open the cover of the SCUBAJET in the water.
Do not use the SCUBAJET below the recommended maximum depth of 40m/131ft.
2.2. WARNINGS ABOUT THE RISK OF
DAMAGE TO OR BY YOUR SCUBAJET
This section contains important instructions for handling the
SCUBAJET. Apart from these instructions, please read and follow the
complete operating manual to prevent damage to your SCUBAJET.
Maintenance for your SCUBAJET
After operation in salty or brackish water, wash all components in fresh water.
Every two months use contact spray to care for all electronic contacts.
You will extend the lifespan of your battery if you do not expose it to hot environments for long
periods.
Always keep the SCUBAJET out of direct sunlight when not in use. Heat kills batteries.
When putting the battery back into
the SCUBAJET,
rotate it by using the
metal ring until the battery selects proper
location. Once the battery is in place, it
should be pressed down until you hear
a beep. Once the beep appeared, the
battery is connected to the SCUBAJET.