Version: 2019-I-2
Page 15 of 33
REGULATOR MANUAL
The blind plugs are to be removed with an allen key. Fitting tools and little exertion
prevents damage on the first stage.
The hoses are installed with a matching spanner. Again, only little exertion.
SCUBA FORCE recommends, if you install accessories like inflator hoses,
instruments or alternative air supplies to contact your specialist dealer. Your SCUBA
FORCE specialist dealer might be able to answer questions you got while reading
this manual.
1. Before connecting your regulator to the compressed air bottle, the Venturi
lever on the second stage should be set tot he „MIN“ (or-) position.
2. If available, the breathing resistance adjustment knob should be fully screwed
in (clockwise). Avoid applying excessive force tot he adjustment knob.
3. When using an INT connection bracket, you should check the O-ring on the
cylinder valve for damage. If you are using a compressed air bottle with a DIN
bottle valve, first remove the protective cap from the thread of the DIN
connection of the first stage and check the O-ring on the DIN connection of
the regulator. If the O-ring is worn out or damaged, replace the O-ring before
installing the regulator on the cylinder valve.
