TB-9079
Page 15 of 17
© 2017 DESCO INDUSTRIES, INC.
Employee Owned
SCS
- 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634 • Website:
StaticControl.com
Calibration
Frequency of recalibration should be based on the
critical nature of those ESD sensitive items handled and
the risk of failure for the ESD protective equipment and
materials. In general, SCS recommends that calibration
be performed annually.
Use the SCS CTE701 Workstation Monitor Checker to
perform periodic verification (once every 6-12 months)
of the WS Aware Monitor. The Workstation Monitor
Checker can be used to check the test limits of the WS
Aware Monitor without removing it from the factory floor.
See
TB-9031
for more information.
Specifications
Power
Power Adapter
100-240VAC
50-60 Hz
Output: 7.5VDC @ 1.5A
Output Plug Polarization: Center
Positive
Output Plug: 5.5 mm O.D. x 2.1
mm I.D. x 9.5 mm L
Operator
Wrist Strap
Dual-Wire
Amount Monitored 2
Resistance Limit
10 megohms (default)
Body Voltage Limit ±2.5VDC (default)
Test Voltage
50mV @ open circuit,
peak-to-peak
Worksurface Mat
Amount Monitored 2
Resistance Limit
100 megohms (default)
Metal Tool
Amount Monitored 2
Resistance Limit
10 ohms (default)
Connectivity
Input
Mini-DIN for operator remotes;
25-28 AWG wire terminal block for
worksurface mats and metal tools
Outputs
RJ45 connector Ethernet output;
Molex #51021-0300 connector for
relay output
General
Alarm
LEDs and buzzer
Dimensions
(Monitor)
3.17" x 2.25" x 1.26"
(81 mm x 57 mm x 32 mm)
Dimensions
(Operator Remote)
2.41" x .84" x 1.13"
(61 mm x 21 mm x 29 mm)
Weight
(Monitor)
0.3 lbs. (0.14 kg)
Weight
(Operator Remote)
0.1 lbs. (0.05 kg)
Figure 10. SCS CTE701 Workstation Monitor Checker