TB-9031
Page 2 of 11
© 2022 DESCO INDUSTRIES INC
Employee Owned
SCS
- 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634 • Website:
Features and Components
A. Operator Dual-wire Jack:
Connect one end of the
included 3.5 mm mono cable here, and the other end
into the monitor's operator jack.
B. Soft/Metal Ground Banana Jack:
Connect the
banana plug terminal of the red test lead here, and the
other end to the monitor's mat or tool ground circuit.
C. Reference Ground Banana Jack:
Connect the
banana plug terminal of the black test lead here, and
the other end to equipment ground.
D. High Body Voltage Test Switch:
Simulates a
BODY VOLTAGE FAIL condition on the monitor's
operator circuit when pressed.
E. Low Body Voltage Low Test Switch:
Simulates
a BODY VOLTAGE PASS condition on the monitor's
operator circuit when pressed.
F. Soft Ground Test Switch:
Simulates a MAT PASS
condition on the monitor when pressed.
G. Wrist Strap Test Switch:
Simulates a OPERATOR
PASS condition on the monitor when pressed.
H. Test Limit DIP Switch:
Configures the test limits on
the CTE701 Verification Tester.
I. High Metal Ground Test Switch:
Simulates a TOOL
FAIL condition on the monitor when pressed.
J. High EMI Test Switch:
Simulates an EMI FAIL
condition on the monitor's tool circuit when pressed.
K. Low EMI Test Switch:
Simulates an EMI PASS
condition on the monitor's tool circuit when pressed.
L. Low Metal Ground Test Switch:
Simulates a TOOL
PASS condition on the monitor when pressed.
M. Low Battery LED:
Illuminates when the battery
needs to be replaced.
N. Power LED:
Illuminates when the CTE701
Verification Tester is powered.
O. Power Switch:
Slide to the left to power the
Verification Tester OFF. Slide to the right to power the
Verification Tester ON.
Figure 2. CTE701 Verification Tester features and
components
D
E
F
G
H
J
I
K
L
N
O
M
A
B
C