7
CONNECT THE BATTERY CHARGER
The battery connector
②
is placed under the recovery tank cover. The battery charger connector
③
is delivered inside the
bag containing this manual, and must be fitted to the battery charger cables according to instructions.
The left picture shows the work connection while the right one shows charging connection.
ATTENTION! THE INSTALLATION PROCESS HAS TO BE CARRIED BY SPECIALISTS. A WRONG OR
DEFECTIVE CONNECTION CAN CAUSE SERIALS DAMAGE TO PERSONS AND MACHINE.
BATTERY CHARGER
Make sure that the battery charger is suitable to the installed battery, both in capacity and in type.
Warning! Never charge a GEL battery with an unsuitable battery charger. Strictly follow the instructions provided by
the battery and battery charger manufacturer.
In order to avoid permanent damage to the battery, they should never be totally discharged. To do this, they should be
recharged within a few minutes after the battery discharge signal start to flash.
ATTENTION:
1.
Never left the battery completely discharged, even if the machine is not being used.
2.
For the daily recharging of the battery it is necessary to strictly follow the instructions provided by the manufacturer or
dealer.
3.
Danger of exhalation of gas and emission of corroding substances.
BATTERY CHARGE LEVEL GAUGE
The batteries’ indicator is digital with 4 fixed positions and a blinking one. The numbers, which appear on the display, show
the approximate charge level.
4=maximum charge 3=3/4 charge 2=2/4 charge 1=1/4 charge 0=discharged batteries (blinking)
Warning! 8 seconds after the “0” blinks, the brush motor automatically switches off. Anyway, the machine can finish
drying before recharging the batteries.
