Manual
Connections ILT-4 Somfy
Manual INTERFACES for ILT2 powered screens rev. 1-2017 | AdeoSreen All Rights Reserved
Page 2
Your screen is equipped with Somfy ILT2 motors which allows more presets than standard Somfy Motors
(LT50 or LS40)
This screen needs to be controlled could be controlled using two controllers:
SOMFY® interface called “SOMFY® 4ILT interface” RS485 (+ converter RS232)
Following instructions concern the “SOMFY® 4ILT control box”.
The following interfaces can be used to connect up to 4 ILT2 Somfy motors on the 2-way or 4-way masked screens.
There are different versions available. In the following table you can compare the various settings based on the version.
Version
Included parts
Set or change end limits motors
Set or change Preset ratio
MCS-ILT-4
only interface
with MCS-ILT-T setting
tool (not included)
with Computer or
automation System
(not included)
MCS-ILT-4-IR
with infrared
remote control
with IR remote control
(included)
with IR remote
control (included)
MCS-ILT-4-IP
with TCP/IP
control
with MCS-ILT-T setting
tool (not included)
with Computer or
automation System
(not included)
CRESTRON® interface developed for ILT2 motors called “C2N-SSC-2” RS232
For the CRESTRON interface please refer to the specific CRESTRON documentation.