Scranton Products Duralife Lockers, Руководство по установке, Страница: 15 / 24

15
SECTION 9. Slope Tops
(Optional)
Slope Top Installation:
First locate all components provided for the slope tops. This will include the slope top(s), 1” thick rear
supports (may be random colors), and #8-1” stainless steel screws.
The first component to be installed for the slope tops is the
1” thick rear support. Mark the location for the rear support
and snap a chalk line along the entire row.
Please note that the rear supports are generally random
lengths, colors and will be concealed under the slope top so
joints do not have to be perfect.
Fasten the rear support to the wall using the 2-3/4” tapcon
screws provided.
Note: If your layout requires an inside corner see the slope
top corner section at this time. Corners require the rear sup-
port to be scribe cut for sufficient support.
Note: All slope top sizes are to be cut in the field
Predrill holes and fasten the
rear support from the inside of
the locker using #8-1” screws
every 24” on center.
A. Slope Top Install
Typical side elevation of a finished slope top
Predrill holes and fasten the rear support from the inside of the locker using #8-1” screws every 24” on
center. See illustration A. Slope Top Install for proper screw positioning.