Scrambler Ducati 1100 Скачать руководство пользователя страница 26

Страница: 26 / 246

Carrying the maximum load allowed

Your motorcycle is designed for long-distance riding,

carrying the maximum load allowed in full safety.

Even weight distribution is critical to preserving

these safety features and avoiding trouble when

performing sudden manoeuvres or riding on bumpy

roads.

Attention

The maximum speed permitted with the side

bags and top case fitted must not exceed 150 km/h

(93 mph) and at any rate it must comply with the

applicable statutory speed limits.

Attention

Do not exceed the total permitted weight for

the motorcycle and pay attention to information

provided below regarding load capacity.

Information about carrying capacity

Important

Arrange your luggage or heavy accessories in

the lowest possible position and close to motorcycle

centre.

Important

Never fix bulky or heavy objects to the

handlebar or to the front mudguard as this would

affect stability and cause danger.

Important

Be sure to secure the luggage to the supports

provided on the motorcycle as firmly as possible.

Improperly secured luggage may affect stability.

Important

Do not insert any objects you may need to carry

into the gaps of the frame as these may foul moving

parts.

Attention

Make sure the tyres are inflated to the proper

pressure and that they are in good condition.

Attention

Make sure the tyres are inflated to the proper

pressure and that they are in good condition.
Refer to paragraph "Tyres".

Dangerous products - warnings

Used engine oil

Содержание 1100























































































































































































































































Результаты поиска

Содержание 1100

Отзывы:

Бренды по названию

Популярные бренды

Scrambler Ducati 1100, Руководство пользователя

Результаты поиска

Содержание 1100

Отзывы:

Бренды по названию

Популярные бренды