Scrambler Ducati 1100 Скачать руководство пользователя страница 185

Страница: 185 / 246

Charging the battery

Removing the battery

Attention

Have the battery removed at a Ducati Dealer or

authorised Service Centre.
To gain access to the battery (A), remove the seat as

described in chapter “Removing and refitting the

seat” and remove the elastic band (B).

Loosen the screws (1), remove the positive cable (2)

and (ABS) positive cable (3) from the positive

terminal and the negative cable (4) and the ABS

negative cable (5) from the negative terminal.

Always start from the negative one (-) and remove

the battery by sliding it out of its housing.

Attention

The battery gives off explosive gases; never

cause sparks or allow naked flames and cigarettes

near the battery. When charging the battery, ensure

that the working area is properly ventilated.
Refitting the battery
Grease the screws (1).

Refit the battery, connect the positive cable (2), and

ABS positive cable (3), to the positive terminal, the

Fig 157

Fig 158

184

Содержание 1100























































































































































































































































Результаты поиска

Содержание 1100

Отзывы:

Бренды по названию

Популярные бренды

Scrambler Ducati 1100, Руководство пользователя

Результаты поиска

Содержание 1100

Отзывы:

Бренды по названию

Популярные бренды