background image

12

User manual.

10 Maintenance

Do the maintenance of engine according to manufacturer's manual.

Every 30 hours or 12 months do following maintenance

:

1. clean, check and grease the slide joints of the moving bars
2. uninstall the harness and check the straps that the harness is attached to frame with
3. replace fuel lines and fuel filter, check the tightness of the valve in the fuel bulb
4. replace the batteries in the SafeStart device every 12 months

Use lukewarm soap solution to clean the harness. The harness must not be cleaned by any 
chemical agent or washed in the washing machine! Using hot water or chemicals may  
weaken or damage the material. Dry the harness after cleaning, avoid direct sunlight. 

Harness must be stored in a dark, well-ventilated room, and also must be protected from 
temperature fluctuations. Harness must not be stored in a room with thinner or other 
aggressive chemical agents.

11 Warranty

Warranty is 24 months from the date of sale. The warranty applies to material and structural 
defects. The warranty does not cover damage caused by careless, improper treatment.

Failure to follow operating restrictions and instructions for maintenance and inspection will 
cause warranty ending on the date of the last inspection. Warranty does not cover repairs 
made to other entities than the manufacturer or an authorized service technician. In the event
of any interference with the paramotor, which will be conducted by the manufacturer or 
authorized person will void warranty.

Spare parts, accessories and components are thoroughly tested by the manufacturer to meet
the demanding requirements for reliable and safe operation of the paramotor . Use only 
original parts, accessories and components. If other parts, accessories and components as 
supplied by the manufacturer are used, paramotor manufacturer cannot  guarantee proper 
functioning and safety of operation and paramotor warranty is void.

Any damage or resulting defect that prevents the use of the paramotor must be reported to 
the manufacturer. After examining the extent of the damage, or to identify the cause glitches 
manufacturer shall determine necessary repairs. The manufacturer may authorize a 
responsible person to carry out repairs.

Proudly designed and manufactured in Slovakia. (www.scoutparamotor.com)

We reserve the right to modify instructions for use.

Содержание Carbon Paramotor













Отзывы:

Похожие инструкции для Carbon Paramotor