manualshive.com logo in svg

Scott PROFLOW FH22, Инструкция по установке и эксплуатации

Поделиться
Скачать
Scott PROFLOW FH22 Скачать руководство пользователя страница 11

11

P/N 595141-01 Rev A  7/08

3. Turn the power switch to the OFF position.
4. Disengage  the  PROFLOW  3  belt  buckle  and  remove  the  belt  and

blower assembly. See FIGURE 13.

FIGURE 13

5. Complete termination of use of the PROFLOW 3 Respirator in ac-

cordance with the OPERATING AND MAINTENANCE Instructions
provided with the respirator.

DISPOSAL OF THE PROFLOW FH22 HOOD

1. Thorough decontamination must be performed in accordance with es-

tablished procedures of the using employer or agency.

2. After  decontamination  and  termination  of  use,  handle  the  PROFLOW

FH22 Hood with care. Residual contaminant may be present. PROFLOW
FH22 Hood must be handled as a contaminated or potentially contami-
nated object.

3. The PROFLOW FH22 Hood is intended for a single use. Dispose of the

used hood according to the procedures defined by your respiratory pro-
tection  program  and  in  accordance  with  federal,  state,  and  local
environmental regulations.

STORAGE

Store new, unused hoods in their sealed packages between 14° F and 122°
F (-10° C and 50° C) at less than 75% humidity.

WARNING

HANDLE CONTAMINATED HOODS WITH
CARE. DO NOT THROW AWAY CONTAMI-
NATED  HOODS  AS  ORDINARY  TRASH.
DISPOSE OF CONTAMINATED HOODS IN
ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL ENVIRONMENTAL REGULA-
TIONS  FOR  HAZARDOUS  WASTE.
FAILURE TO HANDLE AND DISPOSE OF
CONTAMINATED  HOODS  PROPERLY
MAY  RESULT  IN  SERIOUS  INJURY  OR
DEATH.

Содержание PROFLOW FH22













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды