22
PLASMA 5
| BIKE OWNER’S MANUAL 2015
BIKE OWNER’S MANUAL 2015 |
PLASMA 5
23
E
N
G
LI
S
H
E
N
G
LI
S
H
STORAGE BOX
Storage Box Assembly:
position the storage box hard case onto the frame top tube (100), position and
tighten the two M5 storage box screws (423) to the specified torque (T7)
You have the possibility of mounting the divider part to create two dissociated
volumes into your storage box, to do so, position the divider part (422) in between
the hard case slots and slide it to its final position
Position the rubber part (421) onto the hard case (420) and slide it to reach its final
position
Advisory:
You may use soap or dish-washing liquid to facilitate the assembly
Once the rubber cap part has reached its final position, make sure its lips are
correctly inserted in between the top tube and the hard case.
Plasma 5 Storage box SCOTT part number: 238936
HYDRATION SYSTEM
Hydration System:
Advisory:
please note that the integrated bottle can only be assembled on the
Triathlon “riser” stem (301B). The TT “flat” stem (301A) is compatible with a
horizontal top tube assembled bottle cage or any non-integrated extension
mounted BTA hydration system.
Before assembling the bottle onto the frame, please make sure that the bottle
size corresponds to the frame size: there are four bottle sizes S/M/L/XL each
corresponding to the frame size.
Assemble the bottle stem interface part and the bottle mount part (433) to the low
side of the stem (301B) and position and tighten the two M5 head sunk bottle mount
screws (434) to the specified torque (T10).
Clip the bottle cover interface part (431) on the bottle body (430) and assemble the
“anti-splash” bottle foam part (435) into the bottle cap part recess (436). Clip the
bottle cap part (436) onto the bottle body neck (430) and insert the straw into the
bottle cap hole.
Slide the bottle (430) into the bottle mount (433) recess.
Plasma 5 Aero drink SCOTT part number: 238937
