8
WARNING
THE USE OF BATTERIES OTHER THAN THOSE LISTED IN THIS OPERATION AND INSTALLATION INSTRUCTION OR
REPLACING BATTERIES IN AN AREA WHICH IS NOT KNOWN TO BE FREE OF FLAMMABLE GASES AND VAPORS MAY
CAUSE A FIRE OR EXPLOSION AND MAY LEAD TO INJURY OR DEATH.
TO REDUCE THE RISK OF EXPLOSION, USE BATTERIES ONLY FROM THE LIST PROVIDED. USE ONLY BATTERIES
FROMSCOTT SAFETY OR AN AUTHORIZED DISTRUBUTOR. DO NOT MIX OLD BATTERIES WITH UNUSED BATTERIES,
AND DO NOT MIX BATTERIES FROM DIFFERENT MANUFACTURERS. UNAUTHORIZED SUBSTITUTION OF
COMPONENTS MAY CAUSE AN EXPLOSION WHICH COULD LEAD TO SERIOUS INJURY OR DEATH.
9) Repeated exposure to high temperature environments without adequate periods for the unit to self-cool may result
in degradation or loss of the thermal image or damage to the internal components. Be sure to allow adequate
cool-down periods between high temperature exposures.
10) Exposure to high temperature environments for an extended period of time may result in degradation or loss of
the thermal image. Be sure not to overexpose or heat saturate the equipment beyond the design tolerances of the
system.
11) The service life of the X190 depends in part on how it is used and the environmental conditions in which it is used.
Under heavy usage, or under extreme environmental conditions, the service life of the equipment may vary.
12) Batteries supplied with the X190 have been designed based on specific performance values. Replacement
batteries must be obtained ONLY from an Authorized Scott Service Center.
13) The X190 incorporates electric temperature control systems. Run time on each battery may decrease when used
in extreme temperature environments.
14) It is important to test the X190 and any other associated accessories prior to use to ensure that the equipment is
functional before entering a hazardous environment. Always perform a visual and functional check on the
equipment to validate that it has not been damaged or degraded prior to use.
15) Never use the X190 as the sole source of navigation. If system failure occurs, you may become disoriented or lost
in a hazardous environment which could result in death or serious injury.
16) Failure to exit a hazardous environment immediately on observation of the low battery warning may result in
system failure in a hazardous environment which could result in death or serious injury.
17) The X190 is a navigational tool which provides a thermal image in conditions where vision is impaired. The user
should follow safety precautions and protocols, and stay within communications range of the incident command
structure. Failure to do so could result in death or serious injury.
18) While every effort has been made to ensure that your X190 is both tough and reliable, the camera is a
sophisticated electro-optical system that will fail if it is abused or exposed to environments beyond its design
envelope.
19) Do not alter or cover over any labels on the X190 Thermal Imager. Please contact Scott Safety for recommended
fire proof labels that will not compromise the Thermal Imager properties.
20) Batteries must only be changed or charged in areas known to be non-flammable.
21) Battery compartment must be inspected prior to inserting battery to ensure there is no water or dust.
22) Batteries must be kept in non-flammable, clean dry areas when not installed in the instrument.
23) Exposure to some chemicals may degrade the sealing properties of materials used in the X190 and Battery
Assembly.
24) External contacts shall not be used while the equipment is in the hazardous area.
25) The USB connector is not to be used in a hazardous environment.
26) The battery locking set screw must be securely fastened whenever the battery is installed.
27) Ensure the battery is free of water and dust and is also clean and dry prior to installing the battery.
WARNING
FAILURE TO READ, UNDERSTAND, AND OBSERVE THE PRECEDING WARNINGS COULD RESULT IN SERIOUS INJURY
OR DEATH.
Содержание X190
Страница 2: ...2 ...
