16
A
C
B
C
AA
A
AA
C
A
AA
Assembly (continued)
23
Attaching paper stickers and rubber bumpers
□
Put the paper stickers (NN) onto the visible cam locks and screws.
□
Stick the rubber bumpers (VV) on the outer corners of doors where the lower partition panels (R and S) are in
contact with.
24
Attaching upright arms
□
See figure A: Fasten upper 2 screws (AA) through the upright arm (C) into the heater (A) until tight.
□
See figure B: Fasten lower 2 screws (AA) into the upright arm (C) until tight.
□
Fully tighten all 4 screws (AA) one final time.
□
Repeat the same process with upright arm (B).
WARNING: Do not lift or transport the heater by using the upright arms.
NOTE:
Use hand screwdriver, not power driver to assemble fireplace insert
. See BILT for video instructions.
Figure A
Figure B
N
Q
NN
VV
VV
NN
