Scotsman SLD150 Скачать руководство пользователя страница 1

Introduction

To the owner or user: This product manual is a
source of information about the installation, start
up, cleaning, maintenance and repair of the
product.

The SLD150 is a Slim Line® brand hotel/motel ice
dispenser. It is designed to use a Scotsman Slim
Line SLE300 or SLE400 ice machine as the
source for ice.

Ice from the cuber falls into the insulated hopper,
where it is stored until needed. When a user
pushes the dispense button a rotating wheel
scoops the ice up to the top front of the hopper
where there is an outlet to the ice chute. 

Table of Contents

Specifications/Limitations

 .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   page 2

Installation

 .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   page 3

Kits  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   page 5

Final Check List/Initial Start Up/Electrical Sequence  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   page 7

Cleaning  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   page 8

Service Diagnosis   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   page 9

Removal and Replacement  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   page 10

Parts lists and wiring diagrams are located in the
center of this manual, printed on yellow paper.

Note the warning symbol where it appears in this
manual. It is an alert for important safety
information on a hazard that might cause serious
injury.

Keep this manual for future reference.

This manual was printed on recycled paper.

SLD150

October 1996

Page 1

Содержание SLD150












Отзывы: