Model Number
Dimensions (w/o bin)
W" x D" x H"
Basic Electrical
Minimum Circuit
Ampacity*
Maximum
Fuse Size
Refrigerant
Charge
Condenser
Type
MCM1462AS-3A
48 x 24
3
⁄
8
x 27
1
⁄
2
208-230/60/3
20.2
20
60 oz. R-22 Air
MCM1462WS-3A
48 x 24
3
⁄
8
x 27
1
⁄
2
208-230/60/3
19.5
20
64 oz. R-22 Water
* Minimum Circuit Ampacity is used to determine wire size and type per the National Electric Code. If the
numbers listed above are not the same as the nameplate, go by the nameplate.
Power cord is kit number: MPC. Caster kit is number: KBC9.
This ice system is designed to be installed indoors, in a controlled environment.
MINIMUM
MAXIMUM
Air Temperature
50
0
F.
100
0
F.
Water Temperature
40
0
F.
100
0
F.
Water Pressure
20 psi
80 psi
Voltage
-5%
+10%
FOR THE INSTALLER
The MCM1462 will fit the MDB900 ice storage bin
(48" wide). It will double-stack with kit KSMCM48.
The stacking kit includes:
••
Relay box and wires to interconnect bin controls.
••
Stainless steel panel bracket to retain lower unit
front panels.
••
Gasket material to seal joint between cabinets.
••
Heavy duty legs for installation on the bin.
Back View, Water Cooled
Back View, Air Cooled
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.S.A.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
MCM1462
April, 1993
Page 2
