Scotsman MCL 1210 A, Руководство по обслуживанию

Страница: 7 / 34

Page 6
Page 6
2. Level the Storage Bin Assy in both the left
to right and front to rear directions by means of
the adjustable legs.
3. Inspect the Storage Bin top mounting gasket
which should be flat with no wrinkles, to provide
a good sealing when the Modular Cuber is
installed on top of it.
4. Place the Modular Cuber on top of
Storage bin using care not to wrinkle or tear
the gasket.
5. Lift a little bit the Modular Cuber right side in
order to be able to mount the ice level control
bracket taking care to align the hole located on
unit base to mate with the one on the top of the
Bin.
6. Remove the PVC plastic plug closing the
round hole located on the right side of the ice
chute opening.
7. Trace the ice level control assy, secured for
the transport on top of the evaporator of the
Modular Cuber, and direct it down through the
round hole into the Storage Bin.
8. Fasten the ice level control assy on its
bracket by means of the two screws found in the
hardware package supplied with the unit.
9. Make a cut (shear) in the PVC plastic plug
that goes from its edge to the center; insert the
ice level control cable in the center of the plastic
plug so to prevent it from any sort of contact with
the unit frame, then place again the PVC plug in
the round hole keeping the cable exceeding
portion inside the unit.
10. Install the plastic ice cube deflector by
hooking it on the flange of the ice chute opening
in unit base (see illustration).
11. Secure the Modular Cuber on the top of the
Storage Bin using the two bolts and diber washer
found in the hardware package supplied with the
unit.
D. STACKING INSTALLATION
A Stacking Kit KSC 11 is available as an accessory
on request to allow the installation of two Modular
Cubers one on top of the other.
The Stacking Kit is consisting of:
a) unit base gasket
b) plastic reinforced ice chute
connections
Use the ice chute connections supplied in the
KSC Kits..........
... to connect the ice chute of the bottom machine
with the one of the top machine